Polaris Dragon RMK 700 Engine Rebuild Kit (2008-2010)

Description

Engine Rebuild Kit for 2008-2010 Polaris Dragon RMK 700

Use the Polaris Dragon RMK 700 rebuild kit when the engine needs new pistons and seals but the cylinders and crankshaft remain reusable. First, inspect those parts to confirm the correct rebuild level.

What This Kit Includes

• Complete Gasket Kit
• (2) Wrist Pin Needle Bearings
• Water Pump Seal
• (2) Moly-Coated Pistons

Review the Kit Scope

This package does not list replacement cylinders or a crankshaft. Therefore, check both cylinder bores, the crankshaft, rod areas, and crankcase before ordering.

Measure Both Cylinder Bores

Next, inspect each bore for scoring, taper, and out-of-round wear. Also, verify piston clearance and ring end gap before assembly. Follow the required torque values and clearances throughout the rebuild.

Compare the Dragon RMK 700 Rebuild Levels

If the repair only requires pistons, wrist pin bearings, and top-end gaskets, consider the Polaris Dragon RMK 700 Top End Rebuild Kit for 2008-2010 Models.

However, if either cylinder requires replacement, review the Polaris Dragon RMK 700 Complete Engine Rebuild Kit for 2008-2010 Models. That package adds two cylinders.

Assembly and Break-In

Before startup, check piston direction, gasket placement, oil, and bolt torque. Then follow the correct startup steps. Finally, complete the recommended break-in before long pulls or heavy engine load.

REV6 covers this kit with a 1-year parts warranty. If you need help choosing the correct package, contact the REV6 team.