Polaris Dragon RMK 700 Complete Engine Rebuild Kit (2008-2010)

Description

Complete Engine Rebuild Kit for 2008-2010 Polaris Dragon RMK 700

Use the Polaris Dragon 700 complete engine kit when both cylinders need replacement but the crankshaft remains reusable. First, inspect the lower end to confirm the correct rebuild level.

What This Kit Includes

• (2) Cylinders
• Complete Gasket Kit
• (2) Wrist Pin Needle Bearings
• Water Pump Seal
• (2) Moly-Coated Pistons

Review the Kit Scope

This package does not list a crankshaft or crank bearings. Therefore, check the crankshaft, rod areas, bearings, and crankcase before ordering.

Check the New Top-End Parts

Next, verify cylinder and piston sizes before assembly. Also, measure piston clearance and ring end gap. Follow the required torque values, clearances, and gasket steps throughout the rebuild.

Compare the Dragon RMK 700 Rebuild Levels

If both original cylinders remain reusable, consider the Polaris Dragon RMK 700 Engine Rebuild Kit for 2008-2010 Models.

However, if the engine only needs bottom-end gaskets and seals, review the Polaris Dragon RMK 700 Bottom End Rebuild Kit for 2008-2010 Models.

Assembly and Break-In

Before startup, check piston direction, gasket placement, oil, and bolt torque. Then follow the correct startup steps. Finally, complete the recommended break-in before long pulls or heavy engine load.

REV6 covers this kit with a 1-year parts warranty. If you need help choosing the correct rebuild package, contact the REV6 team.