Can-Am Defender HD10 Turbo System 2018–2024

Can-Am Defender HD10 Turbo System

Starting at: $5,050.00

Boost your Can-Am Defender and see horsepower gains to the rear wheels from 45hp to near and above 85hp.

Description

5 PSI Turbo System for Can-Am Defender HD10 Models

This pump-fuel turbo system is designed for the listed Can-Am Defender HD10, Max HD10, and Pro HD10 models. It brings together the turbo, fuel-management, intake, coolant, and oiling components listed for the installation.

Before ordering, confirm your year, model, cab configuration, required fuel grade, and supporting engine condition with REV6.

This Turbo System Includes

Fuel controller
Wideband controller
Turbo assembly
Charge tube
Cold air intake
Coolant lines
Oil supply line
Oil drain assembly
Clamps
Bolts and supplied installation hardware

5 PSI Pump-Fuel Setup

The system is rated for 5 psi of boost and is designed for pump fuel. Confirm the required octane and fuel-controller setup before installation.

Use the supplied wideband controller to monitor the air-fuel ratio during setup and operation. Engine condition, fuel quality, elevation, and configuration can affect the required fuel settings.

Reported Rear-Wheel Horsepower

The current product specifications report an increase from 45 rear-wheel horsepower to approximately 85 rear-wheel horsepower or higher.

Actual results can vary with fuel, elevation, engine condition, drivetrain setup, tires, clutching, tuning, and dyno method. Contact REV6 for the applicable test details before relying on these figures for a specific build.

Inspect the Engine Before Adding Boost

Check engine compression, oil pressure, cooling-system condition, fuel delivery, and valve adjustment before installation. Any existing engine problem should be corrected before adding boost.

Professional installation is recommended. Proper oil-line routing, coolant connections, intake sealing, charge-tube installation, heat control, and fuel setup are critical to the finished build.

Can-Am Defender HD10 Fitment

2018–2024 Can-Am Defender HD10
2018–2024 Can-Am Defender Max HD10
2020–2024 Can-Am Defender Pro HD10

Fitment can vary by model year, cab configuration, and factory equipment. Therefore, verify your selection before purchase. For help, contact the REV6 Performance team.

Can-Am Defender Performance Parts

Browse additional Can-Am Defender performance parts and turbo options available from REV6.

Warranty and Financing

Turbocharging changes engine output and operating load. Review the REV6 warranty policy for coverage terms and exclusions related to the turbo system and modified engine components.

Explore available REV6 financing options for this high-ticket upgrade. You can also talk with our team about fitment, availability, and installation requirements.