Shipping INstruction

You can find our all of these products at Uline,Inc or Amazon

For a smaller engines (400, 500, 570, 700, 800)

1. Use a 18x18x18 Double Wall Corrugated box
2. Use (3) Sealed Air Instapak Quick RT . Open the first Instapak and unfold completely.
Hit #1 and #2 on the Instapak and it will begin to fill with air. Place one instapak at the bottom of the box. Allow the InstaPak to fill about half way before placing the engine on top of the Instapak. As the Instapak fills with air, you will need to hold it in place. **It is helpful to use a clipboard of a book to place on top of the instapak. The Instapak will fill all of the available space.

3. Wrap the air duct for the clutch with extra foam. Its located on the bottom-side of the engine.
**This duct gets damaged easily during shipping. Add a folded 9×9 inch foam square between
the box and the engine on both sides.

4. Use other two Instapaks on both sides of the engine. Use additional packing paper/packing materials/styrofoam to fill any empty space. If there is empty space in the box, the engine will bounce and cause damage.

5. Tape box closed and mark as fragile.

For a larger engines (850, 900, 1000)

1. Use a 24x20x20 Double Wall Corrugated box
2. Place a piece of styrofoam (3 inches thick) at the bottom of the box. Place the engine on top of the styrofoam. The styrofoam allows for the instapak to fill under the engine.

3. Use (4) Sealed Air Instapak Quick RT. Open the first Instapak and unfold completely. Hit #1 and #2 on the Instapak and it will begin to fill with air. Wrap one instapak around one corner of the engine. As the Instapak fills with air, you will need to hold it in place. **It is helpful to use a clipboard of a book to place on top of the instapak. The Instapak will fill all of the available space. The instapak should fill up under the engine as well. Use a second Instapak for the
opposite corner.

4. Use two more Instapaks for the other two corners.

5. Use additional packing paper/packing materials/styrofoam to fill any empty space. If there is empty space in the box, the engine will bounce and cause damage.

6. Tape box closed and mark as fragile.


For a larger engines (850, 900, 1000)

1. Use a 24x20x20 Double Wall Corrugated box

2. Place a piece of styrofoam (3 inches thick) at the bottom of the box.
Place the engine on top of the styrofoam. The styrofoam allows for the instapak to fill under the engine.

3) Use (4) Sealed Air Instapak Quick RT. Open the first Instapak and unfold completely. Hit #1 and #2 on the Instapak and it will begin to fill with air. Wrap one instapak around one corner of the engine. As the Instapak fills with air, you will need to hold it in place. **It is helpful to use a clipboard of a book to place on top of the instapak. The Instapak will fill all of the available
space. The instapak should fill up under the engine as well. Use a second Instapak for the

4) Use two more Instapaks for the other two corners.

5) Use additional packing paper/packing materials/styrofoam to fill any empty space.
If there is empty space in the box, the engine will bounce and cause damage.

6. Tape box closed and mark as fragile

For a larger engines (850, 900, 1000)

1. Use a 24x20x20 Double Wall Corrugated box
2. Place a piece of styrofoam (3 inches thick) at the bottom of the box. Place the engine on top of the styrofoam. The styrofoam allows for the instapak to fill under the engine.

3. Use (4) Sealed Air Instapak Quick RT. Open the first Instapak and unfold completely. Hit #1 and #2 on the Instapak and it will begin to fill with air. Wrap one instapak around one corner of the engine. As the Instapak fills with air, you will need to hold it in place. **It is helpful to use a clipboard of a book to place on top of the instapak. The Instapak will fill all of the available space. The instapak should fill up under the engine as well. Use a second Instapak for the
opposite corner.

4. Use two more Instapaks for the other two corners.

5. Use additional packing paper/packing materials/styrofoam to fill any empty space. If there is empty space in the box, the engine will bounce and cause damage.

6. Tape box closed and mark as fragile.

0